Schedule Appointment Now

 

What're your thoughts about Hot Water Heater Repair?

Several contemporary houses take advantage of an electric hot water heater for their furnace, due to its comfort as well as convenience of use. Nonetheless, much like any other electric home appliances, issues may develop with its use, suddenly. It can be really frustrating to awaken to a chilly shower rather than a hot one or having your bathroom with water that isn't warm sufficient or perhaps also warm. Whatever the instance may be, hot water heater problems can be fairly stressful. The good news is, we've made a checklist of possible options to your hot water heater issues. There are a number of aspects that might create a number of these problems, maybe an issue with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you turn off the major power supply for security. Whatever the problem is, getting it taken care of must not position excessive of a problem if you adhere to these actions:

 

Call A Professional:

If after changing all malfunctioning components and resetting your temperature level, the hot water heater still isn't functioning, you may need to contact a professional plumber for a professional point of view. The issue with your heating unit could be that the cold and hot faucets have been switched or it may be undersized for the quantity of hot water needed in your house. Whatever the case may be, a professional plumber would assist fix the problem.

 

Inspect Your Power Supply:

As basic as this might appear, it is really needed. Without sufficient power, your hot water heater will not operate. So the first thing to do when your water suddenly retires is to validate that it isn't a power issue. Examine if the fuse is burnt out or the breaker tripped. If the breaker is the concern, simply turn it off and on once more. Change any kind of broken or worn-out fuse. Check the device with power after these changes to see if it's now functioning.

 

Examine Your Thermostat:

If your hot water heater still isn't working or the water appearing isn't warm sufficient, you might require to check the temperature settings on your upper thermostat. Make certain the breaker is switched off before doing anything. Open the gain access to panel and also press the red switch for temperature level reset over the thermostat. This should help heat the water. Transform the breaker back on and also examine if the trouble has actually been dealt with.

 

Inspect the Heating Element in the Water Heater:

If it's not a power issue, then attempt looking into your heating element if it is still working. Test each of your heating elements to be sure the problem isn't with any one of them. If any one of them is damaged, replace that part and then examine whether the warm water is back on.

 

Verdict

Hot water heater troubles are not constantly significant. Much of them are because of small problems like a blown fuse or worn-out burner. Changing the malfunctioning parts must suffice. Nevertheless, if you are still incapable to address the trouble, give a call to your local plumber to come to get it fixed.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

We hope you enjoyed reading our article about No Hot Water — Water Heater Repair. Thank you for taking time to read our piece of content. Don't hesitate to set aside a second to share this blog post if you enjoyed reading it. We love reading our article about Hot Water Heater Repair.

Diverse plumbing issues? We resolve.